Sonostar:::ultrasonic thickness gauge, Ultrasound, Thickness Probe, Detector Equipment, Block Series, probes, Phase Array, Phased Arrayultrasonic thickness gauge, Ultrasound, Thickness Probe, Detector Equipment, Block Series, probes, Phase Array, Phased Array,Ultrasonic Testing,Transducer,Phased Array (Linear, Concave, Multi-rings, 2D) Transducers,TOFD Transducers,High frequency Transducers,High temperature transducers,1-3 Piezo-composite,Composite transducers,Contact Transducers,Straight Beam Transducers,Angle Beam Transducers,Immersion Transducers,Dual Element Transducers,Delay line Transducers,Guide Wave Transducers,Constitute Transducers,Train Hollow Shaft Transducers,Transducer Arrays,Dry-coupled Transducers,Customized Transducers,Special Design Transducers,Applications Specific Transducers,Equipment,Flaw detectors,B-mode Imaging Systems,Multi-Channel Systems,Phased Array Systems,Accessories,Wedge for Transducers,Probe Connect Cable,Coupling Gel,InterfaceUltrasound Imaging System Probes,Color Doppler probe,B/W System probe,Ultrasound Flaw Detector Probes ,Direct probe,Oblique probe,Flooding probe,Thickness Probe,Special probe,Piezoelectric composite chip

Prouduct list

	Thickness Gauge
No SmallClass
	Ultrasonic Test Block
No SmallClass
	Piezoelectric ceramic,Probe
No SmallClass
	Densitometer
No SmallClass
	X-ray Flaw Detector
No SmallClass
	Ultrasound Detector System
No SmallClass
	OCT Imaging Detector
No SmallClass
	Test Instrument
Laser Distance Meter Infrared Thermometer Anemometer Sound Level Meter Vibration Meter Humidity & Temperature Meter High Voltage Insulation Tester Earth Resistance Tester Digital RCD (ELCB) Tester
	Accessories
No SmallClass

Product Show

Ultrasonic Test Block >> RC Ultrasonic Test Block (AWS Standards)


		Number:	4103121625
		Name:	RC Ultrasonic Test Block (AWS Standards)
		Spec:
		Memo:
		Class:	Ultrasonic Test Block

Product Readme

RC Calibration Block is used for checking resolution capabilities of angle beam transducers. Contains three sets of .0625" diameter through-holes for 45°, 60° and 70°. In accordance with AWS Welding Highway and Railway Bridges specification D2.0, and Structural Welding Code ANSI/AWS D1.1.
• Dimensions: 152.4 mm x 76.2 mm x 25.4 mm
• Made from 1018 Steel
Free carrying case

Hits：1668 UpdateTime：2010-4-10 【Print】【Close】


	Copyright 2008 Sonostar 　www.sonostar-ndt.com 　e-mail:sonostarndt@163.com Note: Sonostar trademarks is protected by Madrid Treaty.