Sonostar:::ultrasonic thickness gauge, Ultrasound, Thickness Probe, Detector Equipment, Block Series, probes, Phase Array, Phased Arrayultrasonic thickness gauge, Ultrasound, Thickness Probe, Detector Equipment, Block Series, probes, Phase Array, Phased Array,Ultrasonic Testing,Transducer,Phased Array (Linear, Concave, Multi-rings, 2D) Transducers,TOFD Transducers,High frequency Transducers,High temperature transducers,1-3 Piezo-composite,Composite transducers,Contact Transducers,Straight Beam Transducers,Angle Beam Transducers,Immersion Transducers,Dual Element Transducers,Delay line Transducers,Guide Wave Transducers,Constitute Transducers,Train Hollow Shaft Transducers,Transducer Arrays,Dry-coupled Transducers,Customized Transducers,Special Design Transducers,Applications Specific Transducers,Equipment,Flaw detectors,B-mode Imaging Systems,Multi-Channel Systems,Phased Array Systems,Accessories,Wedge for Transducers,Probe Connect Cable,Coupling Gel,InterfaceUltrasound Imaging System Probes,Color Doppler probe,B/W System probe,Ultrasound Flaw Detector Probes ,Direct probe,Oblique probe,Flooding probe,Thickness Probe,Special probe,Piezoelectric composite chip

Prouduct list

	Thickness Gauge
No SmallClass
	Ultrasonic Test Block
No SmallClass
	Piezoelectric ceramic,Probe
No SmallClass
	Densitometer
No SmallClass
	X-ray Flaw Detector
No SmallClass
	Ultrasound Detector System
No SmallClass
	OCT Imaging Detector
No SmallClass
	Test Instrument
Laser Distance Meter Infrared Thermometer Anemometer Sound Level Meter Vibration Meter Humidity & Temperature Meter High Voltage Insulation Tester Earth Resistance Tester Digital RCD (ELCB) Tester
	Accessories
No SmallClass

Product Show

Ultrasonic Test Block >> A5(IOW) Ultrasonic Test Block (NDT, ultrasound, ultrasonic, calibration)


		Number:	4103121618
		Name:	A5(IOW) Ultrasonic Test Block (NDT, ultrasound, ultrasonic, calibration)
		Spec:
		Memo:
		Class:	Ultrasonic Test Block

Product Readme

Beam Calibration Block(BS2704):

Tolerance +/- 0.1mm
Beam profile and resolution checks for shear wave probes.

Sensitivity checks for shear and compression probes. 9off 1.5mm holes.

Description
/Application

Standard Made To

Material Size

Determination of signal curve and beam characteristics of single crystal probes (longer range). 1.6mm diameter hole.

ESI 98-7

Steel

50x75x305mm

Hits：27494 UpdateTime：2010/4/10 【Print】【Close】


	Copyright 2008 Sonostar 　www.sonostar-ndt.com 　e-mail:sonostarndt@163.com Note: Sonostar trademarks is protected by Madrid Treaty.